IEC 61182-1 : 1.0

PRINTED BOARDS - ELECTRONIC DATA DESCRIPTION AND TRANSFER - PRINTED BOARD DESCRIPTION IN DIGITAL FORM

International Electrotechnical Committee

More details

More info

FOREWORD Clause 1 Scope 2 Normative references 3 Terms and definitions    3.1 Annotation record    3.2 Comment record    3.3 Composite records    3.4 Data Information Module (DIM)    3.5 Data layer    3.6 Data record(s)    3.7 Datum reference    3.8 Feature    3.9 Field    3.10 General record    3.11 Job set    3.12 Line record(s)    3.13 Modal form    3.14 Parameter record    3.15 Point record    3.16 Physical layer    3.17 Record    3.18 Subroutine definition record    3.19 Subroutine call record 4 General requirements    4.1 Data hierarchy    4.2 Basic record types    4.3 Record format    4.4 Data set descriptions    4.5 Data orientation    4.6 Transfer media and data formats 5 Parameter records    5.1 Parameter JOB (see figure 5-1)    5.2 Parameter FORM (see figure 5-2)    5.3 Parameter CODE (see figure 5-3)    5.4 Parameter DIM (Data Information Module)         (see figure 5-4)    5.5 Parameter UNITS (see figure 5-5)    5.6 Parameter TITLE (see figure 5-6)    5.7 Parameter NUM (see figure 5-6)    5.8 Parameter REV (see figure 5-6)    5.9 Parameter LANG (see figure 5-7)    5.10 Parameter TOL (see figure 5-8)    5.11 Parameter SCALE (see figure 5-9)    5.12 Parameter LAYER (see figure 5-10)    5.13 Parameter IMAGE (see figure 5-11)    5.14 Parameter FAB (see figure 5-15)    5.15 Parameter AREA (see figure 5-17) 6 Comment records (see figure 6-1)    6.1 Allowable character set    6.2 Use of end-of-record    6.3 Comment records utilizing 2-byte characters         (see figure 6-2) 7 Data record format    7.1 General information    7.2 Operation code description area (see table 7-2)    7.3 Feature Description Area (FDA)    7.4 Location Description Area (LDA) (columns 31-72)    7.5 Unassigned columns (applies to fixed record         formats only) 8 Requirements for LINE records    8.1 Operation codes (see 7.2)    8.2 FDA area    8.3 LDA field definition (columns 31-72)    8.4 Unassigned columns (columns 73-80) 9 Requirements for POINT records    9.1 Operation code definition (columns 1-3)    9.2 Feature Description Area (FDA) (columns 4-30)    9.3 LDA field definition (columns 31-72)    9.4 Unassigned columns (columns 73-80) 10 Requirements for ANNOTATION records    10.1 Operation codes (columns 1-3) (see 7.2)    10.2 Feature Description Area (FDA) (columns 4-30)    10.3 'LDA' field definition (columns 31-72)    10.4 Continuation records (columns 4-72)    10.5 Unassigned columns (columns 73-80) 11 Requirements for SUBROUTINE definition records    11.1 Operation code definition (columns 1-3)    11.2 Feature Description Area (FDA) (columns 4-30)    11.3 LDA field definition    11.4 Unassigned columns (columns 73-80) 12 Subroutine CALL records    12.1 Operation code definition (columns 1-3)    12.2 Feature Description Area (columns 4-30)    12.3 LIDA definition (columns 31-72) 13 Feature libraries and ANSI ASCII character set    13.1 Primary and secondary side designations    13.2 Standard feature libraries - D2000 and D3000 series    13.3 Standard feature library - D4000 series    13.4 Special shape library    13.5 Allowable character set Tables Figures Annex A - Summary of IEC 1182-1 record formats

Abstract

Covers record formats used to describe printed board products with detail sufficient for tooling, manufacturing and testing requirements. These formats may be used for transmitting information between a printed board designer and a manufacturing facility. Can also be used when the manufacturing cycle includes computer aided processes and numerically controlled machines. The information can be used for both digital and manual interpretation.