GENERAL PRINCIPLES OF NUCLEAR REACTOR INSTRUMENTATION - SIXTH SUPPLEMENT: STEAM GENERATING, DIRECT CYCLE, HEAVY-WATER MODERATED REACTORS
International Electrotechnical Committee
FOREWORD<br>PREFACE<br>Clause<br>1 Introduction<br> 1.1 General<br> 1.2 Scope<br> 1.3 General requirements<br> 1.4 Definitions<br>2 Neutron fluence rate (flux) measurement<br> 2.2 Neutron detectors<br> 2.3 Instrumentation for neutron fluence rate <br> (flux) measurement<br> 2.7 Measurement of fluence rate (flux) distribution<br>3 Temperature measurements<br> 3.1 General consideration<br> 3.2 Effect of irradiation on accuracy of temperature <br> measurements<br> 3.3 Measurement of fuel temperature<br> 3.4 Measurement of moderator temperature<br> 3.5 Measurement of coolant temperature<br> 3.6 Measurement of temperatures which are considered <br> to be vital for reactor safety<br> 3.9 Measurement of vessel temperature<br>4 Coolant measurements<br> 4.1 General consideration<br> 4.2 Coolant flow<br> 4.3 Coolant pressure<br> 4.4 Coolant level<br> 4.5 Coolant leakage<br> 4.6 Coolant and moderator purity<br> 4.7 Coolant activity<br> 4.8 Containment system pressure<br>5 Protection system<br> 5.4 Functions within protection system<br> 5.9 Design of safety interlock system<br> 5.12 Safety monitoring parameters
Lays down additional standard requirements concerning neutron flux measurements, temperature measurements, measurements on the coolant, and the protection system.
| Document Type | Standard |
| Status | Current |
| Publisher | International Electrotechnical Committee |
| Committee | SC 45A |
