Design Guidelines for the Effects of Creep, Fatigue & Creep-Fatigue Interaction with Design-By-Analysis and Nondestructive Inspection Acceptance Criteria (STP-PT-070 - 2014)
American Society of Mechanical Engineers
Foreword
Abstract
1 INTRODUCTION
2 PREAMBLE
3 REVIEW OF CODES AND STANDARDS
4 DEVELOPMENT OF DESIGN-BY-ANALYSIS RULES
5 FLAW ACCEPTANCE CRITERIA
6 RECOMMENDATIONS AND FUTURE WORK
7 REQUIRED CHANGES AND ADDITIONS TO ASME
CODES TO SUPPORT THE PROPOSED
DESIGN-BY-ANALYSIS APPROACH
REFERENCES
APPENDIX A - COMPARISION AND PROTECTION TABLES
This report identifies, prioritizes and addresses technology gaps in the ASME Pressure Technology Codes and Standards. A key component of this project was to review an extensive selection of current Codes and Standards which relate to power boilers and develop guidelines for component design and flaw acceptance criteria. The main focus of this project is to evaluate the current state of understanding with regard to creep-fatigue interaction for intended boiler materials to support the development of effective Design-By-Analysis (DBA) rules.
| Document Type | Standard |
| Status | Current |
| Publisher | American Society of Mechanical Engineers |
