Methods of test for textiles Physical tests - Determination of bursting force of textile fabrics - Ball burst method
Standards Australia
Sets out a method for determining the bursting force of textile fabrics in equilibrium with the standard atmosphere for testing and of fabrics in the wet state. The method uses a tensile machine based on the constant rate of extension principle. It is based on ASTM D3787 and is particularly applicable where fabric stretch is an important characteristic.
RECONFIRMATION NOTICE
Technical Committee TX-020 has reviewed the content of this publication and in accordance with Standards Australia procedures for reconfirmation, it has been determined that the publication is still valid and does not require change.
Certain documents referenced in the publication may have been amended since the original date of publication. Users are advised to ensure that they are using the latest versions of such documents as appropriate, unless advised otherwise in this Reconfirmation Notice.
Approved for reconfirmation in accordance with Standards Australia procedures for reconfirmation on 6 July 2016.
The following are represented on Technical Committee TX-020:
Ag Research
Australian Wool Processors Council
AWTA Textile Testing
Council of Textile and Fashion Industries of Australia
Drycleaning Institute of Australia
National Association of Testing Authorities Australia
RMIT University
The Textile Institute
This Standard sets out a method for determining the bursting force of textile fabrics in equilibrium with the standard atmosphere for testing and of fabrics in the wet state. The method uses a tensile machine based on the constant rate of extension principle.
| Document Type | Standard |
| Status | Current |
| Publisher | Standards Australia |
| ProductNote | Reconfirmed 05/08/2016. This standard has been reconfirmed in Australia in 2016 and remains current in New Zealand. Reconfirmation Notice 05/08/2016 |
| Committee | TX-020 |
| Supersedes |
|
